Belajar Membaca Protokol IEC 104 (60870-5-104)

Setelah hari-hari kerja disibukkan dengan adanya project EAM (Enterprise Asset Management) di kantor, saya menyempatkan diri untuk mengikuti sharing knowledge mengenai Protokol IEC 104. Yah, sharing dijadwalkan 2 hari saya hanya bisa ikut 2 jam, tapi ga pa pa lah yang penting mengerti walupun kulit-kulitnya saja hehe.. pengennya sih saya buat RTU (Remote Terminal Unit) menggunakan protokol 104 tapi waktu yang belum sempat mendalami, sempatnya baru bisa membuat RTU protokol modbus TCP/IP aja, testting OK.

Btw mohon maaf ya kalau cara menuliskan nya sedikit rumit. Langsung saja, oya kalau mau tau apa itu Protokol IEC 104 check ini dia :

IEC 60870-5-104

IEC 60870-5-104 (IEC 104) protocol is an extension of IEC 101 protocol with the changes in transport, network, link & physical layer services to suit the complete network access. The standard uses an open TCP/IP interface to network to have connectivity to the LAN (Local Area Network) and routers with different facility (ISDN, X.25, Frame relay etc.) can be used to connect to the WAN (Wide Area Network). Application layer of IEC 104 is preserved same as that of IEC 101 with some of the data types and facilities not used. There are two separate link layers defined in the standard, which is suitable for data transfer over Ethernet & serial line (PPP - Point-to-Point Protocol). The control field data of IEC104 contains various types of mechanisms for effective handling of network data synchronization.
Nah ini dia caranya :

Hehe.. pusing ga? ya nanti lagi saya ulas supaya lebih mudah lagi ya..